158EZNM Andrew/CommScope Type-N Male EZfit® Connector for 1-5/8 in FXL-1873 and AVA7-50 cable

158EZNM Type N Male EZfit® for 1-5/8 in FXL-1873 and AVA7-50 cable

MFR: Andrew / Commscope

NOTE: THIS IS SPECIAL ORDER.  NORMAL DELIVERY IS 2-3 WEEKS ARO.

General Specifications
Interface	N Male
Body Style	Straight
Brand	EZfit®
Mounting Angle	Straight
Electrical Specifications
Connector Impedance	50 ohm
Operating Frequency Band	0 – 2700 MHz
Cable Impedance	50 ohm
3rd Order IMD, typical	-116 dBm @ 1800 MHz
3rd Order IMD Test Method	Two +43 dBm carriers
RF Operating Voltage, maximum (vrms)	707.00 V
dc Test Voltage	2000 V
Outer Contact Resistance, maximum	0.30 mOhm
Inner Contact Resistance, maximum	2.00 mOhm
Insulation Resistance, minimum	5000 MOhm
Average Power	0.6 kW @ 900 MHz
Peak Power, maximum	10.00 kW
Insertion Loss, typical	0.05 dB
Shielding Effectiveness	-130 dB
Outline Drawing
Click on image below to enlarge.
Mechanical Specifications
Outer Contact Attachment Method	Clamp
Inner Contact Attachment Method	Captivated
Outer Contact Plating	Trimetal
Inner Contact Plating	Silver
Attachment Durability	25 cycles
Interface Durability	500 cycles
Interface Durability Method	IEC 61169-16:9.5
Connector Retention Tensile Force	2224 N   |   500 lbf
Connector Retention Torque	13.56 N-m   |   120.00 in lb
Insertion Force	66.72 N   |   15.00 lbf
Insertion Force Method	MIL-C-39012C-3.12, 4.6.9
Pressurizable	No
Coupling Nut Proof Torque	4.52 N-m   |   40.00 in lb
Coupling Nut Retention Force	444.82 N   |   100.00 lbf
Coupling Nut Retention Force Method	MIL-C-39012C-3.25, 4.6.22
Dimensions
Nominal Size	1-5/8 in
Diameter	63.10 mm   |   2.48 in
Length	76.12 mm   |   3.00 in
Weight	550.50 g   |   1.21 lb
Environmental Specifications
Operating Temperature	-40 °C to +85 °C (-40 °F to +185 °F)
Storage Temperature	-55 °C to +85 °C (-67 °F to +185 °F)
Immersion Depth	1 m
Immersion Test Mating	Mated
Immersion Test Method	IEC 60529:2001, IP68
Water Jetting Test Mating	Mated
Water Jetting Test Method	IEC 60529:2001, IP66
Moisture Resistance Test Method	MIL-STD-202F, Method 106F
Mechanical Shock Test Method	MIL-STD-202F, Method 213B, Test Condition C
Vibration Test Method	IEC 60068-2-6
Corrosion Test Method	MIL-STD-1344A, Method 1001.1, Test Condition A
Standard Conditions
Attenuation, Ambient Temperature	20 °C   |   68 °F
Average Power, Ambient Temperature	40 °C   |   104 °F