AL5DF-PS Andrew/CommScope 7/16 DIN Female Connector, AVA5-50

AL5DF-PS 7-16 DIN Female Positive Stop™ for 7/8 in AL5-50 and AVA5-50 cable

MFR: Andrew / Commscope

NOTE: FOR AVA5-50 CABLE ONLY.  WILL NOT WORK ON AVA5-50FX.

General Specifications
Interface	7-16 DIN Female
Body Style	Straight
Brand	HELIAX®   |   Positive Stop™
Mounting Angle	Straight
Electrical Specifications
Connector Impedance	50 ohm
Operating Frequency Band	0 – 5200 MHz
Cable Impedance	50 ohm
3rd Order IMD, typical	-120 dBm @ 910 MHz
3rd Order IMD Test Method	Two +43 dBm carriers
RF Operating Voltage, maximum (vrms)	1415.00 V
dc Test Voltage	4000 V
Outer Contact Resistance, maximum	1.50 mOhm
Inner Contact Resistance, maximum	0.40 mOhm
Insulation Resistance, minimum	5000 MOhm
Average Power	3.0 kW @ 900 MHz
Peak Power, maximum	40.00 kW
Insertion Loss, typical	0.05 dB
Shielding Effectiveness	-130 dB
Outline Drawing
Click on image below to enlarge.
Mechanical Specifications
Outer Contact Attachment Method	Ring-flare
Inner Contact Attachment Method	Captivated
Outer Contact Plating	Trimetal
Inner Contact Plating	Silver
Attachment Durability	25 cycles
Interface Durability	50 cycles
Interface Durability Method	IEC 61169-4:9.5
Connector Retention Tensile Force	1334 N   |   300 lbf
Connector Retention Torque	8.13 N-m   |   72.00 in lb
Insertion Force	200.17 N   |   45.00 lbf
Insertion Force Method	IEC 61169-1:15.2.4
Pressurizable	No
Dimensions
Nominal Size	7/8 in
Diameter	37.21 mm   |   1.47 in
Length	69.09 mm   |   2.72 in
Weight	220.00 g   |   0.49 lb
Environmental Specifications
Operating Temperature	-55 °C to +85 °C (-67 °F to +185 °F)
Storage Temperature	-55 °C to +85 °C (-67 °F to +185 °F)
Immersion Depth	1 m
Immersion Test Mating	Unmated
Immersion Test Method	IEC 60529:2001, IP68
Water Jetting Test Mating	Unmated
Water Jetting Test Method	IEC 60529:2001, IP66
Moisture Resistance Test Method	MIL-STD-202F, Method 106F
Mechanical Shock Test Method	MIL-STD-202F, Method 213B, Test Condition C
Thermal Shock Test Method	MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C
Vibration Test Method	IEC 60068-2-6
Corrosion Test Method	MIL-STD-1344A, Method 1001.1, Test Condition A
Standard Conditions
Attenuation, Ambient Temperature	20 °C   |   68 °F
Average Power, Ambient Temperature	40 °C   |   104 °F