EZ401SMSM-8 8 Foot Cable Assembly with EZ-FLEX401 Coax Cable and SMA Male Connectors (18GHz)

$49.95

In stock

SKU

EZ401SMSM-8

EZ401SMSM-8 8 Foot Cable Assembly with EZ-FLEX401 Coax Cable and SMA male Connectors on both sides, MFR: EZ-Flex (New Surplus)

EZ401SMSM-8 8 Foot Cable Assembly with EZ-FLEX401 Coax Cable and SMA male Connectors on both sides

Pre-made Cable assembly with EZ-Flex401 cable and SMA Male solder type connectors on either end.

Limited Quantity Available.

Specs:

EZ-Flex 401 cable good to 18 GHz

INNER CONDUCTOR¹:Solid silver-plated copper, AWG 14 gage, 0.064 inch (1.628 mm) nominal diameter
DIELECTRIC²: Solid PTFE teflon, 0.209 inch (5.309 mm) nominal outer diameter
INNER SHIELD³: Silver-plated copper strip, 0.217 inch (5.512 mm) nominal outer diameter
OUTER SHIELD⁴:Silver-plated copper braid, AWG 40, 0.233 inch (5.918 mm) nominal outer diameter
OUTER JACKET⁵:Extruded blue FEP teflon, 0.265 inch (6.731 mm) nominal outer diameter, marked "EZ FLEX 401" at approximately 6 inch intervals
BEND RADIUS:.500 inch minimum
WEIGHT:7.7 lbs. per 100 feet, nominal 11.5 Kg per 100 meters, nominal
OPERATING TEMP: -65°C to +200°C

MFR: EZ Form Cables

CONFIGURATION

ELECTRICAL
CHARACTERISTIC IMPEDANCE:50 ohms +-2 ohms
VELOCITY OF PROPAGATION: 70% nominal
DIELECTRIC CONSTANT:2.04 nominal
VOLTAGE WITHSTANDING:7500 vrms @ 60 hz
CORONA EXTINCTION VOLTAGE:3000 vrms @ 60 hz
MAXIMUM OPERATING FREQUENCY:18 GHz

TYPICAL ATTENUATION: (20°C)