- Shop All Categories
- Adapters
- Amplifiers
- Anderson Power Pole
- Antennas and Related Products
- Attenuators
- Books & Manuals
- Capacitors
- Cases, Chassis, Enclosures
- Chokes & Inductors
- Circuit Boards
- Circuit Breakers
- Coax Seal
- Coax Wrap
- Coaxial Cable & Accessories
- Coils and Coil Form
- Cable Assemblies
- Connectors - Binding Post
- Connectors - Heliax Type (Andrew-Commscope/ RFS-Cablewave/ Eupen)
- Connectors - High Voltage
- Connectors - Jones Style
- Connectors - Unidapt
- Connectors - RF Coaxial
- Diodes
- Dummy Loads
- Fans
- Ferrite Cores
- Filters
- Fuses
- Galaxy Radio Service Parts
- Grounding & Lightning Protection
- Heatshrink
- Heatsinks
- Knobs
- Inrush Current Limiters
- Insulators
- Integrated Circuits
- Mini-Circuits
- Modules - RF Power
- Multimeters / Test Meters
- Oscillators
- Panel Meters
- Power Supply
- Potentiometers
- Radio & Amplifier Service Parts
- Radios
- Rectifiers
- Relays
- Resistors
- Rheostat
- Signal Samplers
- Solder
- Speakers
- Splitter / Combiners / Directional Couplers / Bias-TEE
- VINTAGE
- Switches
- Terminal Strips
- Tools
- Transformers
- Transistors - RF, Mosfets, Misc.
- Tubes - Transmitting, Audio, Misc.
- Varistor
- Wattmeters & VSWR Meters
- Wire
- Home
- Amplifiers
- VINTAGE
- Product Catalog
- My Cart
Skip to Content
1-800-RFPARTS (1-800-737-2787)
1-760-744-0700 (USA)
ORDERS: rfp@rfparts.com
435 S PACIFIC ST SAN MARCOS, CA 92078
F4NR-HC Type-N Male Right Angle Connector, FSJ4-50B, Andrew
$52.95
In stock
SKU
F4NR-HC
- Buy 10 for $51.95 each and save 2%
- Buy 25 for $50.95 each and save 4%
F4NR-HC Type N Male Right Angle for 1/2 in FSJ4-50B cable, Hex Nut, Captivated Pin MFR: Andrew
F4NR-HC Type N Male Right Angle for 1/2 in FSJ4-50B cable, Hex Nut, Captivated Pin
MFR: Andrew
| General Specifications | |
| Interface | N Male |
| Body Style | Right angle |
| Brand | HELIAX® |
| Mounting Angle | Right angle |
| Electrical Specifications | |
| Connector Impedance | 50 ohm |
| Operating Frequency Band | 0 – 10200 MHz |
| Cable Impedance | 50 ohm |
| 3rd Order IMD, typical | -116 dBm @ 910 MHz |
| 3rd Order IMD Test Method | Two +43 dBm carriers |
| RF Operating Voltage, maximum (vrms) | 707.00 V |
| dc Test Voltage | 2000 V |
| Outer Contact Resistance, maximum | 0.30 mOhm |
| Inner Contact Resistance, maximum | 2.00 mOhm |
| Insulation Resistance, minimum | 5000 MOhm |
| Average Power | 0.6 kW @ 900 MHz |
| Peak Power, maximum | 10.00 kW |
Insertion Loss, typical  |
0.05 dB |
| Shielding Effectiveness | -110 dB |
| Outline Drawing | |
 Click on image below to enlarge. |
|
| Mechanical Specifications | |
| Outer Contact Attachment Method | Self-flare |
| Inner Contact Attachment Method | Captivated |
| Outer Contact Plating | Trimetal |
| Inner Contact Plating | Gold | Silver |
| Interface Durability | 500 cycles |
| Interface Durability Method | IEC 61169-4:9.5 |
| Connector Retention Tensile Force | 445 N | 100 lbf |
| Connector Retention Torque | 5.42 N-m | 48.00 in lb |
| Pressurizable | No |
| Coupling Nut Proof Torque | 4.52 N-m | 40.00 in lb |
| Coupling Nut Retention Force | 444.82 N | 100.00 lbf |
| Coupling Nut Retention Force Method | MIL-C-39012C-3.23, 4.6.22 |
| Dimensions | |
| Nominal Size | 1/2 in |
| Height | 46.59 mm | 1.83 in |
| Length | 63.63 mm | 2.51 in |
| Right Angle Length | 22.10 mm | 0.87 in |
| Weight | 160.90 g | 0.35 lb |
| Width | 24.50 mm | 0.96 in |
| Environmental Specifications | |
| Operating Temperature | -55 °C to +85 °C (-67 °F to +185 °F) |
| Storage Temperature | -55 °C to +85 °C (-67 °F to +185 °F) |
| Immersion Depth |
1 m |
| Immersion Test Mating | Unmated |
| Immersion Test Method | IEC 60529:2001, IP68 |
| Water Jetting Test Mating | Unmated |
| Water Jetting Test Method | IEC 60529:2001, IP66 |
| Moisture Resistance Test Method | MIL-STD-202F, Method 106F |
| Mechanical Shock Test Method | MIL-STD-202F, Method 213B, Test Condition C |
| Thermal Shock Test Method | MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C |
| Vibration Test Method | MIL-STD-202F, Method 204D, Test Condition B |
| Corrosion Test Method | MIL-STD-1344A, Method 1001.1, Test Condition A |
| Standard Conditions | |
| Attenuation, Ambient Temperature | 20 °C | 68 °F |
| Average Power, Ambient Temperature | 40 °C | 104 °F |
Return Loss/VSWR
| Frequency Band | VSWR | Return Loss (dB) |
| 50–1000 MHz | 1.05 | -32.00 |
| 1000–1900 MHz | 1.06 | -30.00 |
| 1900–2200 MHz | 1.06 | -30.00 |
| 2200–2700 MHz | 1.08 | -28.00 |
| 2700–3600 MHz | 1.19 | -21.00 |
| 3600–6000 MHz | 1.19 | -21.00 |
| 6000–8800 MHz | 1.25 | -19.00 |
| 8800–10200 MHz | 1.29 | -18.00 |
| Call For Price | No |
|---|---|
| Featured Product | No |
| Made in the USA | No |
| NOS | No |
| Manufacturer Name | TALLEY INC. |