STUF Silica PTFE Unionizing Filler, 3.2 Cu. In. Tube

STUF  "Silica PTFE Unionizing Filler"  Dielectric Waterproofing Filler

“ Prevents Moisture Infiltration by Occupation “

3.2 CU. In. Volume per tube.  

https://www.youtube.com/watch?v=2l0PqZr8-_o

An Ultra-low Density, All Dielectric Filler Specifically Formulated to Simulate Coaxial Cable Core.

Many Coaxial connectors are poorly  designed and contain air pockets which allow a “ breathing” of the connector with changes in ambient temperatures.

Directions: Mate tube of STUF with connector cap end and fill. Thread connector and snug with wrench. A slight resistance to tightening should be noted as STUF is channeled into voids.

STUF Factoids:

• STUF is a pure dielectric compound: It is inert to electromagnetics (Dielectric ); Put a blopin a microwave oven, it will not even get warm.
• STUF has a dielectric constant simulating the most common coaxial cable core used in residential coax :Polyetyelene Foam , <- 1.5
• STUF is non-frequency dependent: From shortwave to microwave it responds the same to the signal energy.
• STUF contains corrosion inhibitors which crawl into the cable braid and connector body to control corrosion.
• STUF will not interfere with electrical throughput in powered cables: stuf is  highly extrudeable and is forced, like air, away from metal to metal contacts.
• STUF will stop migration of flooded cable fluids into connector voids, which causes high return ( reflection ) losses in flooded cable assemblies.
• Factory box is 50 pieces.